AW2400
The AW2400 proves that an audio workstation that's easy to use can also offer professional-class features and performance for music production. Once you've learned the basics you can efficiently go from concept to CD while concentrating on the music rather than the technical details.
Features :
- 16-input/24-track system records top-quality uncompressed 16-bit or 24-bit audio at 44.1 or 48 kHz (12 tracks when recording 24 bit audio).
- 8 virtual tracks per physical track (26 x 8 in 16-bit mode) provide plenty of capacity for alternate takes.
- Substantial 40-gigabyte high-speed 3.5" hard disk provides plenty of internal storage as well as fast, reliable recording and playback performance.
- Built-in CD-RW drive lets you burn original audio CDs that can be played on any standard CD player, as well as make reliable CD data backups. Copyright permitting, copy CD data to the internal hard drive.
- High-performance 24-bit A/D and D/A converters guarantee outstanding audio quality.
- 4-band EQ with a choice of Type I and Type II EQ modes and versatile dynamics processing on all mixer inputs and recorder tracks.
- Full-length 100-millimeter motor faders facilitate precise mixing and mix automation.
- Eight XLR and TRS microphone/line inputs, with switchable phantom power for all XLR connectors and insert patch points on inputs 1 and 2.
- A Mini-YGDAI expansion slot on the rear panel accepts a range of high-performance I/O expansion cards.
- Sound Clip function makes it simple to record short audio samples or memos.
- Four high-performance assignable effect processors provide a range of ambience, modulation, and mastering effects.
- Pitch Fix function allows precise vocal pitch correction.
- Scene memory allows up to 99 mix setups to be memorized for each song.
- USB 2.0 interface provides fast data transfer between the AW2400 and a computer for effective data management.
- Data compatibility with the Yamaha AW1600, AW4416, AW2816, and AW16G audio workstations.
Specifications :
General
All faders are nominal when measured. Output impedance of signal generator:150 ohms
| Internal Processing |
32bit |
| Sampling Frequency |
44.1, 48kHz (-6% ~ +6%) Internal Clock
44.1, 48kHz (-10% ~ +6%) External Clock |
| Frequency Response |
0, +1/-3 dB 20Hz ~ 20kHz, ref to the nominal output level @1kHz
(MIC/LINE INPUT - STEREO OUT) (GAIN max) |
Total Harmonic Distortion Fs = 44.1kHz
*Total Harmonic Distortion is measured with 20kHz LPF |
Less than 0.05% @20Hz ~ 20kHz / +4dBu
(MIC/LINE INPUT - STEREO OUT) (GAIN min) |
Dynamic Range
*Dynamic range is measured with IHF-A filter |
115 dB typ. DA Converter (STEREO OUT)
109 dB min. DA Converter (STEREO OUT) (INPUT CH all off)
110 dB typ. AD+DA (MIC/LINE INPUT to STEREO OUT)
104 dB min. AD+DA (MIC / LINE INPUT to STEREO OUT) (GAIN min) |
| Crosstalk@1kHz |
-70 dB |
| Phantom Voltage |
48V |
| AD Converter |
24 Bit Linear / 128 Times Oversampling |
| DA Converter |
24 Bit Linear / 128 Times Oversampling |
| MIDI |
MTC (Master / Slave), MIDI Clock (Master), MMC (Master / Slave), Program Change, Control Change |
| Memory |
Scene Memory, EQ Library, Compressor Library, Gate Library, Effect Library, Channel Library |
| Fader |
13 x 100mm (Moterized) |
| Display |
320 x 240 dot GRAPHIC LCD (contrast control pot.) |
| Power Requirements |
120V 60Hz 85W, 230V 50Hz 85W, 220-240V 50/60Hz 85W |
| Dimensions (W x D x H) : mm |
533 x 503 x 153 |
| Net Weight |
11.5kg |
| Operating Temperature |
5~35 degrees |
| Mixer |
| Audio Input Section |
MIC/LINE INPUT: 8 CH (XLR & PHONE)
INSERT INPUT: 2 CH (STEREO PHONE X 1)
DIGITAL STEREO IN: 2 CH (COAXIAL STEREO x 1) |
| Audio Output Section |
STEREO OUT: 2 CH (STEREO x 1)
MONITOR OUT: 2 CH (STEREO x 1)
OMNI OUT: 4 CH (PHONE X 4)
INSERT OUT: 2 CH (STEREO PHONE X 2)
PHONES: 2 CH (STEREO x 1)
DIGITAL STEREO OUT: 2 CH (COAXIAL STEREO x 1) |
| Card Slot |
Mini-YGDAI CARD SLOT: 1Slot, max 16 CH (for Mini-YGDAI Card) |
| Mixer Input Section |
MIC/LINE INPUT: 16 CH
INTERNAL EFFECT RETURN: 8 CH (STEREO x 4)
RECORDER MONITOR: 24 CH
Total 48 CH |
| Internal Effect Section |
EFFECTS: 4 Units |
| Master Section |
BUS: 4 CH (STEREO x 2)
AUX: 4 CH
STEREO: 2 CH (STEREO x 1)
SOLO 2: CH (STEREO x 1)
EFFECT: 4 CH
Total 16 Bus |
| Recorder |
| Recording Resolution |
16bit / 24bit |
| Sampling Frequency |
44.1kHz |
| Maximum Number of Songs |
100 Songs |
| Maximum Number of Simultaneous Recording / Playback Tracks |
16 Tracks Recording (16bit), 24 Tracks Playback (16bit)
8 Tracks Recording (24bit), 12 Tracks Playback (24bit) |
| Number of Tracks |
208 Tracks (24 Tracks + STEREO Track) x 8 Virtual (16bit)
112 Tracks (12 Tracks + STEREO Track) x 8 Virtual (24bit) |
| HDD |
Type: 3.5"IDE
Capacity: 40 GB |
| Edit Functions |
Song Edit: OPTIMIZE, DELETE, COPY, IMPORT
Track Edit: ERASE, DELETE, INSERT, COPY, MOVE, EXCHANGE, TIME COMP / EXPAND, PITCH CHANGE, EXPORT, CD IMPORT, WAV IMPORT |
| Other Functions |
LOCATE:Quick LOCATE RTZ, A, B, LAST REC IN, LAST REC OUT, DIRECT LOCATE 1 ~ 9
MARK 1~99
PUNCH I / O:MANUAL PUNCH I / O, AUTO PUNCH I / O
PITCH FIX |
| CD-RW DRIVE |
DATA BACKUP, CD-AUDIO MAKEUP and PLAYBACK, CD-AUDIO IMPORT, WAV FILE IMPORT |
| Communication with External Devices |
| MIDI IN |
5 pin DIN |
| MIDI OUT / THRU |
5 pin DIN |
| FOOT SW |
PHONE |
| USE 2.0 |
Type B |
| * 0dBu is referenced to 0.775 Vrms |
Analog Input Characteristics
| Input Terminals |
GAIN |
Actual Load Impedance |
For Use With Nominal |
Input Level |
|
Connector |
|
|
|
|
Nominal |
Max. before clip |
|
| INPUT [1-8] |
Min. |
3k ohm |
50-600 ohm Mics & 600 ohm Lines |
+4dBu (1.23V) |
+24dBu (12.28V) |
XLR-3-31, Phone Jack (TRS Balanced) |
|
Max. |
|
|
-46dBu (3.88mV) |
-32dBu (19.47mV) |
|
| INPUT [1,2] |
Min. |
10k ohm |
600 ohm Lines |
0dBu (0.775V) |
+20dBu (7.75V) |
Stereo Phone Jack (TRS) | INPUT: XLR-3-31 type connectors are balanced. (1=GND, 2=HOT, 3=COLD)
INPUT: Phone jacks are balanced. (Tip=HOT, Ring=COLD, Sleeve=GND)
INSERT IN Stereo phone jack is unbalanced. (Tip=INSERT OUT, Ring=INSERT IN, Sleeve=GND)
In these specifications, 0dBu=0.775 Vrms.
All AD converters (INPUT1-8) are 24 bit linear, 128times oversampling.
+48V DC (phantom power) is supplied to INPUT(1-8) XLR type connectors via each INPUT1-4, INPUT5-8 switch.
Analog Output Characteristics
| Output Terminals |
Actual Source Impedance |
For Use With Nominal |
Output Level |
|
Connector |
|
|
|
Nominal |
Max. before clip |
|
| STEREO OUT [L,R] |
75 ohm |
600 ohm Lines |
+4dBu (1.23V) |
+24dBu (12.28V) |
Phone Jack (TRS Balanced) |
| MONITOR OUT [L,R] |
75 ohm |
600 ohm Lines |
+4dBu (1.23V) |
+24dBu (12.28V) |
Phone Jack (TRS Balanced) |
| OMNI OUT [1-4] |
150 ohm |
10k ohm Lines |
0dBu (0.775V) |
+20dBu (7.75V) |
Phone Jack (Unbalanced) |
| INSERT OUT [L,R] |
600 ohm |
10k ohm Lines |
0dBu (0.775V) |
+20dBu (7.75V) |
Stereo Phone Jack (TRS) |
| PHONES [L,R] |
100 ohm |
8 ~ 40 ohm |
6mW/8 ohm
19mW/40É&Mac182; |
25mW/8 ohm
75mW/40 ohm |
Stereo Phone Jack (TRS) | STEREO OUT,MONITOR OUT phone jacks are balanced. (Tip=HOT, Ring=COLD, Sleeve=GND)
INSERT OUT Stereo phone jack is unbalanced. (Tip=INSERT OUT, Ring=INSERT IN, Sleeve=GND)
PHONES Stereo phone jack is unbalanced. (Tip=LEFT, Ring=RIGHT, Sleeve=GND)
In these specifications, 0dBu=0.775 Vrms.
All DA converters are 24bit, 128times oversampling.
Digiral Input Characteristics
| Terminal |
Format |
Data Length |
Connector |
| DIGITAL STEREO IN |
IEC-60958 (S/P DIF) |
24bit |
RCA Pin Jack |
Digiral Output Characteristics
| Terminal |
Format |
Data Length |
Connector |
| DIGITAL STEREO OUT |
IEC-60958 (S/P DIF) |
24bit |
RCA Pin Jack |
Control I/O Characteristics
| Terminal |
|
Format |
Level |
Connector |
| (TO HOST) |
USB |
USB 2.0 |
0V - 3.3V |
B type USB connector |
| MIDI |
IN |
MIDI |
|
DIN Connector 5P |
|
OUT/THRU |
MIDI |
|
DIN Connector 5P | |
